My Cart
Your Shopping Cart is Empty
My LS3/5A Journey
|
0 comments
posted by Vincent Zhang
Published by IWISTAO
Immersed reading—like disappearing into a novel.
When it comes to hi-fi, the British BBC LS3/5A is a hurdle almost no audiophile can avoid. If you try to list the loudspeakers that have not only survived decades but also appreciated dramatically, the LS3/5A would likely rank near the very top.
In 2004, Taiwan’s Audio Forum published a supplement titled Everlasting Classics, and one article there pointed out that the LS3/5A was among the most recommended and most frequently featured pieces of equipment. Twenty-one years have passed since then—and even today, the situation has not changed much.
Early Research: Hong Kong and “Ah Ming”
The earliest person to conduct a dedicated, systematic study of the LS3/5A was a Hong Kong audiophile known as “Ah Ming.” Many years ago, he self-published a book titled The Immortal Legend of Loudspeakers: LS3/5A, priced at HKD 80 at that time. Although deeper research later revealed a few inaccuracies in that book, for LS3/5A fans at the time, it was practically a must-have—almost everyone owned a copy.
15Ω and 11Ω: Two Production Eras
From 1974 to 1987, the LS3/5A belonged to what is often called the 15-ohm era. The main producers included Rogers, Spendor, Audiomaster, Chartwell, Goodmans, and RAM.
From 1988 to 1998, it entered the 11-ohm era, with production mainly by Rogers, Spendor, Harbeth, and KEF. Among these, the two brands that truly spanned both eras were Rogers and Spendor.
The LS3/5A earned its fame in the 1980s, but it reached the broader market largely in the late 1980s— primarily during the 11-ohm period. It then became widely popular amid the early-1990s audiophile boom, continuing until 1998, when KEF discontinued the T27 tweeter and B110 mid-bass driver. In other words, during the hottest years of the 1990s, most people were actually listening to 11-ohm LS3/5A, and Rogers / Harbeth / KEF / Spendor effectively “ruled the world.”
Why LS3/5A Became My First Target (1995)
When I planned to buy my first hi-fi system in 1995, my target was already the LS3/5A. There were two major influences behind that decision.
Influence #1: A 1994 Magazine Article That Shaped My Thinking
In 1994, while browsing the CD section of a bookstore, I discovered a magazine called Audiophile (I believe it was the second issue). Inside was a beginner’s guide article titled “A Hi-End Starter Audio System”, which had a strong impact on me.
That article was my first real introduction to the idea of the “British sound.” It argued that when choosing speakers, it is best to start with classic British designs that prioritize midrange integrity and soundstage construction—ideally BBC-derived designs like the LS3/5A. This approach, it said, is hard to get wrong, holds value well, and delivers strong musical expressiveness. It even suggested using a tube amplifier (such as 300B tube amp) and a CEC 891R CD player—spending modestly, yet establishing a correct listening philosophy.
Looking back now, those viewpoints were surprisingly solid. It really was a proper path for beginners. From then on, I developed a deep affection for the BBC-influenced British sound.
Influence #2: A Spark Audio Demo That Sounded Like Heaven
The second influence happened around January 1995. Spark Audio—newly founded at the time—held a small promotional event. If I remember correctly, there were two sessions, and I attended both.
Spark showcased two tube amplifiers: the Model 560 using FU29 tubes, and the Model 550 using 300B tubes. The event mainly used the 560. The speakers included a pair of Rogers 11-ohm rosewood BBC LS3/5A, an LS5/9, and a pair of PSB 800 floorstanders.
The Rogers LS3/5A belonged to the host himself—well known as a radio program presenter in the audiophile world. He wasn’t tall, wore a small mustache (a bit like George Lam), had a musical background, spoke with wit and ease, and hosted the event brilliantly.
When the 560 drove the LS3/5A, the sound was, to me at that time, simply otherworldly. I still remember listening to Zhu Zheqin’s Yellow Children. The top-end had excellent density—warm, sweet, and smooth. The musical expression was rich and deeply moving. That demonstration left the LS3/5A with an exceptionally beautiful image in my mind.
When LS3/5A Sounds Bad (Yes, It Can Happen)
Of course, I have also heard LS3/5A systems that sounded genuinely poor. For example, at the audio section of a foreign-language bookstore, there was a Rogers LS3/5A paired with an AB1 bass unit. And at a hi-fi center, I heard a Rogers 11-ohm pair. In both cases, they were driven by a Rotel integrated amplifier (the 960BX, if I recall correctly). The speakers were severely under-driven—nothing opened up, and the results were disappointing.
That’s the thing about the LS3/5A: if you don’t drive it properly, it can make you doubt the legend itself. (Laughs.)
The Long “Knot in the Heart” (1995 → 2015)
Even in the autumn of 1995, I still didn’t manage to buy an LS3/5A. The reason was simple: the dealers had no Rogers stock. Harbeth was available, but it cost 11,500 HKD—far beyond my budget. Spendor and KEF were rare and not cheap either. Later, around 1998, a Spendor pair cost about 9,300 HKD, while a piano-black KEF version was even more expensive—around 14,000 HKD.
Still, the LS3/5A remained a “knot in my heart.” Before 2015, I owned several speakers; two of them leaned heavily toward the traditional British sound: the Castle Inversion 15 and the Harbeth Super HL5 in rosewood. Finally, in the autumn of 2015, I acquired a Spendor 11-ohm LS3/5A with a bi-wire crossover— and that long-held wish was finally fulfilled.
A few years later, I added a second pair: a ProAc LS3/5A in ebony veneer. At that point, I owned two pairs of 11-ohm LS3/5A at the same time.
Living with Two Pairs of 11-Ohm LS3/5A
I drove these two LS3/5A pairs with two amplification setups: an Exposure 15.2, and a classic Naim chain consisting of a NAC 32 preamp, SNAPS power supply, and NAP 160 power amp.
Overall, the two 11-ohm LS3/5A pairs were remarkably consistent in their character. Compared with the ProAc Super HL5 30th Anniversary (rosewood) that I had used for a long time, the LS3/5A put more emphasis on vocals—more captivating and emotionally “pulling” in a direct way. Vocals separated from the ensemble more clearly. The upper-mid and treble density was higher than the Super HL5, and female vocals had stronger penetration. The presentation felt more active and animated.
The decay was longer and more flavorful, and the treble stood out more. Naturally, the bass quantity was not as abundant as the Super HL5—after all, this is a 5-inch driver— but it still conveyed a convincing sense of scale. Imaging and localization were exceptionally strong; that advantage was obvious.
The Super HL5’s strength, on the other hand, is its ability to build atmosphere and tell a musical story— its sense of emotional narration is truly wonderful.
Back to 15 Ohms (2024 → Present)
In November 2024, since I no longer had either of my 11-ohm LS3/5A pairs, I purchased a pair of Rogers black-label 15-ohm LS3/5A, paired with Yue stands. A 15-ohm pair is something you simply must own—at least that’s how it feels. (Laughs.)
Then, in September of this year, to properly match the 15-ohm LS3/5A, I acquired a Line Magnetic “Ange” AS-135 300B single-ended tube amplifier and upgraded the full set of tubes.
With the AS-135 driving the LS3/5A, everything felt perfectly “on the right track.” The black-label LS3/5A seemed to grow into a small giant: richer midrange body, longer trailing decay, extremely high mid-to-high density, and abundant detail. The overall performance clearly surpassed what I achieved with my previous solid-state amplifiers.
Once again, this confirmed an old belief: the LS3/5A is better suited to voltage-driven tube amplification. The saying “LS3/5A won’t sing without tubes” truly has a solid basis.
Conclusion
For veteran audiophiles, owning a pair of LS3/5A almost feels like a matter of course. As for which brand—or whether it is 11 ohms or 15 ohms—those details feel less important in the end.
Because in the world of BBC LS3/5A, there is one simple truth: If it’s an LS3/5A, it sounds good.
0 comments