6X5GT vs 6Z5P Vacuum Tube Rectifiers: Technical Comparison & Specs

Home
IWISTAO
A Tale of Two Rectifiers: A Deep Dive into the 6X5GT and 6Z5P Vacuum Tubes

A Tale of Two Rectifiers: A Deep Dive into the 6X5GT and 6Z5P Vacuum Tubes

Feb 03, 2026 | 0 comments posted by Vincent Zhang

Published by IWISTAO

In the world of vintage electronics and modern audiophile equipment, the power supply is the unsung hero. It is the foundation upon which the entire performance of an amplifier or radio is built. At the heart of many of these power supplies from the mid-20th century lies a crucial component: the full-wave vacuum tube rectifier. Among the most common and respected of these are the American 6X5GT and its international counterpart, the 6Z5P. This article provides a detailed exploration of these two tubes, their history, technical characteristics, and their roles in shaping the sound we cherish today.

The Archetype: A Deep Dive into the 6X5GT

The 6X5GT is a cornerstone of vacuum tube technology, a full-wave rectifier that powered countless devices from the 1930s onward. Its reliability and well-understood characteristics made it a favorite among engineers for decades (vacuumtubes.io).

History and Development

First introduced around 1936, the 6X5 family was designed for use in the power supplies of AC and automobile radio receivers (r-type.org, icp-electronique.com). It came in several variations, including an early metal-envelope version (6X5), a larger "shoulder" glass tube (6X5G), and the most common tubular glass version, the 6X5GT. All share identical electrical characteristics (vacuumtubes.io). It was also given the American military designation VT-126B, underscoring its widespread adoption and reliability (r-type.org).

Vacuum Tube 6Z5P 1 Pair Inventory Product High Reliability Replace 6X5GT 6X5 CA574

Design and Principles of Operation

The 6X5GT is a dual-diode tube with a common cathode, built on an octal (IO) base (radiomuseum.org). Its design is optimized for full-wave rectification in conjunction with a center-tapped power transformer. In this configuration, the two internal plates (anodes) are connected to the opposing ends of the transformer's high-voltage secondary winding. As the AC voltage cycles, the plates conduct alternately, allowing a continuous flow of electrons to the single shared cathode. This process efficiently converts the incoming AC into a pulsating DC voltage (vacuumtubes.io).

A key design feature is its indirectly heated cathode. Unlike directly heated rectifiers, the heater filament is electrically isolated from the cathode. This separation significantly reduces the injection of AC hum into the DC power supply, a critical factor in audio applications. Furthermore, this design introduces a warm-up delay before the tube begins to conduct, a "soft-start" feature that prevents sudden voltage surges, thereby extending the life of other components like filter capacitors (vacuumtubes.io).

Technical Specifications

The 6X5GT operates under a well-defined set of maximum ratings that designers had to respect. According to datasheet information, these are:

Heater Voltage (Vh): 6.3 Volts
Heater Current (Ah): 0.6 Amps
Max AC Plate Voltage (per plate): 325 Volts
Max DC Output Current (mAa): 70 mA

(Source: r-type.org)

The tube exhibits a characteristic voltage drop of approximately 20 volts at its rated current. This internal drop is a significant factor in power supply design, as it lowers the final B+ voltage compared to modern solid-state diodes. This drop, however, is also a contributor to the tube's sonic signature (vacuumtubes.io).

Applications and Usage

The 6X5GT's modest current capacity made it ideal for low-to-medium power applications. It was a staple in:

Radio Receivers: It was ubiquitous in AC/DC tabletop and smaller console radios of the 1940s and 1950s (vacuumtubes.io).
Audio Amplifiers: Many lower-powered audio amplifiers, including phonographs, small public address systems, and vintage guitar amplifiers, utilized the 6X5GT in their power supplies (vacuumtubes.io).
Test Equipment: Its reliability and consistent performance made it a common choice for power supply rectification in laboratory and test instruments, such as the Eico 950B capacitor bridge (audiokarma.org, vacuumtubes.io).

Sonic and Performance Characteristics

While a rectifier doesn't process the audio signal directly, its behavior under load profoundly impacts the sound of an amplifier. The 6X5GT's relatively high impedance and slow recovery time contribute to a phenomenon known as "power supply sag." When a musician plays a loud note, the high current demand causes a momentary drop in the B+ voltage. This compression and subtle distortion are often described as a "warm" or "breathing" quality, highly desirable in many guitar amplifiers (vacuumtubes.io). This is a distinct characteristic that solid-state rectifiers, with their near-zero impedance and instant response, cannot replicate.

The Counterpart: Understanding the 6Z5P

The 6Z5P is often encountered by hobbyists and restorers as a direct replacement for the 6X5GT. While less documented in Western literature, it is functionally its twin, originating from Chinese and Soviet-era production.

Origin and Identification

The 6Z5P is a Chinese designation, with the "P" indicating a common glass tube construction (toutiao.com). Its Russian equivalent is often cited as the 6Ц5С (transliterated as 6Ts5S). Datasheets confirm the 6Z5P is an indirectly heated, dual-anode, full-wave rectifier designed for low-power applications, mirroring the description of the 6X5GT perfectly (tube-data.com).

It is crucial to distinguish the rectifier 6Z5P (6Ж5П / 6Ts5S) from the similarly named Russian pentode 6Ж5Л (6Zh5L). The latter is a high-frequency amplifier tube with completely different characteristics and is not a rectifier (r-type.org). This common point of confusion can lead to incorrect substitutions.

Equivalency and Characteristics

Multiple sources confirm that the 6Z5P is a direct, pin-compatible substitute for the 6X5GT (tubeampdoctor.com, oldsound.it). This implies that its key operating parameters are identical:

Heater Voltage: 6.3 Volts
Heater Current: 0.6 Amps
Max Plate Voltage: ~325 Volts
Max DC Output Current: ~70 mA

Chinese sources note that the 6Z5P has parameters very similar to the Chinese 6Z4 rectifier, which itself is often cross-referenced with the 6X5GT (though the 6Z4 has a different 7-pin base) (toutiao.com, zhihuanlan.zhihu.com). As a direct equivalent, the 6Z5P shares the same octal pinout, applications, and sonic characteristics as the 6X5GT, including the beneficial "soft-start" warm-up delay.

Head-to-Head: 6X5GT vs. 6Z5P

When choosing between these two tubes, the decision often comes down to origin, availability, and cost rather than electrical performance.

Performance: For all practical purposes, the electrical and sonic performance is identical. A 6Z5P can be dropped into a socket designed for a 6X5GT without any circuit modification.
Origin and Collectibility: The 6X5GT has a rich history with renowned manufacturers like RCA, Philips, and Zenith. New Old Stock (NOS) tubes from these brands are highly sought after by collectors and audio purists for their historical significance and reputed build quality (vacuumtubes.io, tubesocketvintagego.com). The 6Z5P, being of Chinese or Russian origin, is generally more common and less expensive, making it an excellent utility replacement.
Pinout: Both tubes use the same International Octal (IO) 8-pin base with the following connections:
- Pin 2: Heater
- Pin 3: Anode (Plate 2)
- Pin 5: Anode (Plate 1)
- Pin 7: Heater
- Pin 8: Cathode
(Source: r-type.org)

Practical Design and Substitution Considerations

Circuit Design

A typical power supply using a 6X5GT or 6Z5P involves a power transformer with a high-voltage secondary winding (e.g., 600V center-tapped, providing 300V to each plate). The center tap is connected to ground, and the cathode (pin 8) provides the raw, pulsating DC output. This output must then be filtered by a network of capacitors and chokes (inductors) to smooth out the ripple and provide a stable B+ voltage for the rest of the circuit (vacuumtubes.io, diyaudio.com).

Due to the **70mA current limitation**, these tubes are not suitable for high-power amplifiers on their own. However, for applications requiring more current, designers have successfully used two 6X5GT tubes in parallel. In one such design for a stereo 6L6GA amplifier, a user proposed connecting the plates of both tubes together to effectively double the current handling capacity to around 140mA, a viable strategy for medium-power designs (diyaudio.com).

Equivalent and Substitute Tubes

If you need to replace a 6X5GT or 6Z5P, you have several options:

Direct, Pin-Compatible Equivalents: 6X5, 6X5G, 6X5GT, 6Z5P, 6Ц5С, EZ35, CV574, VT-126B. These can be swapped directly (oldsound.it, tubeampdoctor.com).
Near Equivalents (require modification):
- 5Y3GT: A popular rectifier with a higher current rating (125mA), but it requires a **5V heater supply** and has a different pinout.
- 6Z4 / CV572: Electrically similar but uses a different 7-pin miniature base, requiring a socket change and rewiring.
- EZ80 / 6V4: A European equivalent with similar specs but on a 9-pin miniature base.
(Source: vacuumtubes.io)
Solid-State Replacements: Plug-in modules using silicon diodes are available. They are efficient and reliable but have drawbacks. They provide instant-on power, which can stress other vintage components, and their lower voltage drop will increase the B+ voltage, potentially altering circuit operating points. Most significantly, they eliminate the "sag" characteristic, changing the sonic signature of the amplifier, which is why many purists avoid them in audio applications (vacuumtubes.io).

Tube preamplifier below employing a 6Z5P vacuum-tube rectifier for high-stability power supply operation.

IWISTAO HIFI Tube Pre-amplifier 6N8P Preamp 6Z5P Rectifier Pure Tube Amplifier Solid Wood Casing Slim and Elegant

Conclusion

The 6X5GT and its international twin, the 6Z5P, represent a pivotal piece of electronics history. They are more than just obsolete components; they are robust, reliable rectifiers that defined the power supplies of a generation of radios and amplifiers. The 6X5GT stands as the classic American original, valued by collectors and restorers for its pedigree. The 6Z5P serves as its functionally identical and more accessible counterpart, ensuring that vintage equipment can be kept running for years to come.

For any hobbyist, technician, or audiophile working with vintage gear, understanding these tubes is essential. Their unique characteristics—the gentle warm-up, the inherent voltage drop, and the resulting power supply sag—are not flaws, but key ingredients in the recipe for the classic "tube sound." Whether you are restoring a 1940s radio to its original glory or building a new guitar amplifier with a vintage voice, both the 6X5GT and 6Z5P remain excellent and relevant choices.