Understanding Key Loudspeaker Parameters(8): Effective Piston Area (Sd

Home
IWISTAO
Understanding Key Loudspeaker Parameters(8): Effective Piston Area (Sd)--The Relationship Between Cone Size and Output

Understanding Key Loudspeaker Parameters(8): Effective Piston Area (Sd)--The Relationship Between Cone Size and Output

Nov 19, 2025 | 0 comments posted by Vincent Zhang

Published by IWISTAO

Among all loudspeaker parameters, Sd (Effective Radiating Area) is one of the most fundamental. It defines how much air a speaker can move—directly determining bass output, efficiency, maximum SPL, and distortion characteristics. Although simple in concept, Sd has a powerful influence on how “big” a loudspeaker sounds.

1. What Is Effective Radiating Area (Sd)?

Sd represents the effective surface area of the diaphragm that actively pushes air to produce sound. It includes:

The main cone surface
A portion of the surround (usually half its width)

Sd is measured in cm² or m². It does not include non-moving or low-motion components such as the dust cap or frame.

2. Relationship Between Sd and Din

Sd is calculated using the Effective Diaphragm Diameter (Din):

S_d = π × D_in² / 4

Because Sd depends on the square of Din, even small changes in diaphragm diameter can cause large differences in radiating area.

Understanding Key Loudspeaker Parameters(7)

3. Typical Sd Values by Driver Size

Nominal Size	Typical Sd (cm²)	Description
2″	15–20	Micro drivers
3″	25–35	Compact full-range
4″	45–55	Small mid-bass
5.25″	75–95	Bookshelf woofer size
6.5″	120–150	Most common Hi-Fi woofer
8″	210–260	Strong bass capability
10″	330–380	Home theater woofer
12″	450–550	Classic subwoofer
15″	750–900	Professional bass drivers
18″	1100–1300	High-SPL subwoofers

4. Why Sd Matters

a. Air Displacement (Vd)

Sd is one of the two key components of air displacement:

V_d = S_d × X_max

A larger Sd allows a speaker to produce deep, powerful bass even at modest excursion levels.

b. Maximum SPL

Below 200 Hz, volume depends largely on how much air the driver can move. Bigger Sd = higher potential SPL.

c. Bass Extension

A driver with larger Sd can maintain strong output at lower frequencies compared to drivers with small Sd.

d. Efficiency

Large Sd improves low-frequency efficiency, an advantage in woofers, subwoofers, and pro audio drivers.

e. Distortion Behavior

A small Sd driver must move farther (large excursion), increasing distortion. A large Sd driver moves less for the same output, reducing distortion.

f. Directivity

As Sd increases, high-frequency dispersion narrows. This is why large woofers require lower crossover points.

5. Measuring Sd

To measure Sd:

Measure the diaphragm including half the surround width.
Calculate Din (effective diameter).
Compute Sd using the circular area formula.

Professional tools such as DATS, CLIO, or ARTA can also derive Sd from impedance or acoustical modeling.

6. Real-World Examples

Driver Model	Size	Din (mm)	Sd (cm²)	Notes
Full-range A	3″	60	28	Fast but limited bass
Woofer B	6.5″	140	154	Most common Hi-Fi woofer size
Woofer C	8″	180	254	Strong low-frequency performance
Subwoofer D	12″	260	530	Classic deep bass
Subwoofer E	15″	340	907	High displacement capability

7. How Designers Use Sd

Calculating air displacement (Vd)
Designing subwoofers
Estimating maximum SPL
Predicting low-frequency roll-off
Determining crossover frequencies
Modeling port/vent airflow
Selecting appropriate Xmax
Optimizing multi-way driver matching

Conclusion

Effective Radiating Area (Sd) is one of the most critical Thiele–Small parameters because it determines how much air a loudspeaker can move. Together with Xmax, Bl, and Vas, Sd defines the bass strength, efficiency, and overall dynamic capability of a driver.

Understanding Sd helps designers and enthusiasts build speaker systems that deliver deep, powerful, and controlled low-frequency performance.

blog tags: Din effective radiating area Sd sound engineering speaker diaphragm area SPL capability Thiele-Small parameters Vd Xmax